2. Setting Up Your Phone

OR

• Enter the Speed Dial Set/Clear code (default = 710).

3.Enter the PSD bin number (80-99).

4.Enter the phone number you want to be speed-dialed (maximum length = 16 characters). Remember to include the Intercom Level or MCO Code level code depending on how the system is set up. (Refer to the following table.)

Table 5. Characters allowed when assigning PSD numbers

To insert a . . .

Enter/Press...

 

 

Digit or character

0, 1-9, *, #

 

 

Intercom Level*

AUTO * #

 

 

MCO Code**

AUTO * 0

 

 

Pause

REDIAL

 

 

DP - DTMF Code

AUTO * *

 

 

SSD Code

AUTO

 

NN(N)

Hyphen (-) (Appears when the number is dialed or

PROG

checked, but not during programming)

 

Display Number (Start/Stop) ***

AUTO * 2

 

 

DTMF Conversion After the Other Party Answers

AUTO * 3 (Version 2.5 and

 

higher)

Hyphen (-) (Appears when the number is dialed or

 

checked, but not during programming.)

 

* Indicates that the digits that follow are either a feature access code or extension number. (Do not include if system is set for Intercom Level.)

** Indicates that the digits that follow are for an outside number. (Do not include if system is set for CO Level.)

** Indicates that the enclosed digits should not be displayed during dialing. Must pre- cede and follow the digits that you do not want displayed. Example: AUTO*2 555- 4143 AUTO*2

5.Press the HOLD key.

6.Replace the handset or press the ON/OFF key.

To delete a PSD number assigned to a one-touch or soft key

Note: When deleting a PSD number from a non-display phone, be sure to record the change in your personalized list of PSD numbers. (See Appendix B, “Customized PSD Bin Numbers” on page 101.)

576-36-750

DBS 576 (USA), issued October 2000

27

Page 27
Image 27
Panasonic DBS 576HD To delete a PSD number assigned to a one-touch or soft key, To insert a Enter/Press, Auto * #, Higher