Panasonic DBS 576HD manual Assigning and Deleting Names for PSD Numbers

2. Setting Up Your Phone

1.Pick up the handset or press the ON/OFF key.

2.Either:

• Press the PROG key and then press the AUTO key.

OR

• Enter the Speed Dial Set/Clear code (default = 710).

3.Press the soft or one-touch key (for the PSD bin [80-99]) to be programmed.

4.Press the AUTO key.

5.Enter the SSD bin number that contains the first part of the number to be dialed. (If a pause is required, press the REDIAL key.)

6.Repeat steps 4-5 (up to 5 more times) for each remaining SSD number to be linked.

7.Press the HOLD key when you are finished.

8.Replace the handset or press the ON/OFF key.

To use a PSD key that links multiple speed dial numbers

1.If necessary, select the trunk group (9, 81-84) to access an outside line. (Normally the trunk is selected by the speed dial numbers.)

2.Press the PSD key.

Assigning and Deleting Names for PSD Numbers

After assigning a PSD number to a one-touch or soft key, you can assign a name to the key (e.g., “Home,” “John,” etc.). You can then view the assigned PSD name when you are in the PSD Directory mode.

Note: You need to know the PSD bin number for PSD number in order to assign a name to it. To determine the bin number, see “Checking Speed Dial Numbers” on page 54.

To assign a name to a PSD number

Note: This task requires a display phone.

1.Pick up the handset or press the ON/OFF key.

2.Press the PROG key.

3.Press the * key.

576-36-750 DBS 576 (USA), issued October 2000 29