Panasonic DBS 576HD manual Enter Message Key ID Code and press Hold to store the entry

Models: DBS 576HD

1 102
Download 102 pages 18.44 Kb
Page 40
Image 40

2. Setting Up Your Phone

To set the Special Day Modes using either a large-display or small-display phone:

1.Enter “User Maintenance” by pressing: ON/OFF PROG * * CONF

2.Enter: 07, press HOLD, enter: 1, and press HOLD HOLD.

3.Enter: Start Time in Hours - 2 characters, and Minutes - 2 characters for the Special Day 1 mode and press HOLD to store the entry.

Note: To clear an entry or existing data, press the FLASH key.

4.Enter: Desired mode for Special Day: 0 - None, 1 - Day 1, 2 - Day 2, 3 - Night, 4 Night 1, 5 - Night 2 and press HOLD to store

the entry.

Note: To clear an entry or existing data, press the FLASH key

5.To set additional Special Day modes, press the VOLUME up or down arrow or HOLD to move to the desired mode.

6.Repeat steps 3-5 until all Special Day modes are set. (Up to 20 Special Days may be entered.).

Note: The entry positions are listed in Chapter 4 of Section 700 - Feature Operations.

7.Press AUTO PROG to return to “81-User Maintenance” (step 1 above).

OR...

Press AUTO ON/OFF to exit User Maintenance.

Message Key

To set the Message Key ID code using either a large- display or small-display phone:

1.Enter “User Maintenance” by pressing: ON/OFF PROG * * CONF

2.Enter: 06 and press HOLD HOLD.

3.Dial the Extension Number of the Phone Being

Programmed and press HOLD.

4.Enter: Message Key ID Code and press HOLD to store the entry.

Note: The ID code may contain up to 16 digits and contain 0, 1-9,*, #, pause (REDIAL key).

To clear an entry or existing data, press the FLASH key.

40

DBS 576 (USA), issued October 2000

576-36-750

Page 40
Image 40
Panasonic DBS 576HD manual Enter Message Key ID Code and press Hold to store the entry