2. Setting Up Your Phone
4.Dial the phone number to be stored.
5.Press the HOLD key.
6.Replace the handset or press the ON/OFF key.
To assign an SSD number to a one-touch key
1.Pickup the handset or press the ON/OFF key.
2.Press the PROG key.
3.Press the
4.Press the AUTO key.
5.Enter the SSD bin number to be programmed.
6.Press the HOLD key.
7.Replace the handset or press the ON/OFF key.
To assign a feature code or extension number to a
Note: **When the system is set up for MCO Code level,
1.Pickup the handset or press the ON/OFF key.
2.Press the PROG key.
3.Press the
4.**If the feature functions at the MCO Code level, press AUTO * #.
5.Enter the desired feature code or extension number.
6.Press the HOLD key.
7.Replace the handset or press the ON/OFF key.
To check a programmed one-touch key
Note: This task requires a display phone.
1.Pickup the handset or press the ON/OFF key.
2.Press the CONF key.
24 | DBS 576 (USA), issued October 2000 |