6. Using Additional Features
USING VOICE RECOGNITION
With the installation of additional hardware, you can use verbal commands to dial extensions, speed dial numbers, and access various phone features.
Note: This feature requires system programming and addition hardware
USING THE FLASH FEATURE
You can send a signal to your phone to release an outside line by pressing the FLASH key or the PROG key. Once you press either key, your phone will either reseize the same outside line or switch to extension dial tone status.
Note: This feature requires system programming. For more information, see your system administrator or dealer.
MAKING CONFERENCE CALLS
You can use your phone to create conference calls that include up to three parties. (With the installation of an optional
Notes:
•When no optional conference card is installed, the System supports the following types of
•3 extensions
•2 extensions and 1 outside line
•1 extension and 2 outside lines
•When the optional
The Version 2.0 software release allows any combination of extensions and CO lines be in the conference as long as the original extension is in the conference and the total number of parties does not exceed 8. With Version 2.0 software, only one operation is used to establish and add to a conference. You simply have to place the current call on hold, dial the next party and press the CONF key. No different operation or access code is required to add additional parties to the call.
To establish a conference call
1.While on a call, press the HOLD key or the outside line key you are using.
2.If adding an outside party, press a vacant CO key or dial a trunk access code.
DBS 576 (USA), issued October 2000 | 83 |
