Quick Start

Operating the answering device

Listening to messages in common memory

When the unit receives voice messages; —the NEW MSGS. indicator will flash,

—the call counter will show the total number of recorded messages, and —a slow beep will sound if message alert (page 61) is set to ON.

Basic operations

Listening to new recorded messages

Press NEW MSGS. PLAY BACK .

Listening to all of the recorded messages

Open the station key panel, then press

ALL MSGS. PLAY BACK .

Note:

During playback, the display shows the recorded order of the messages.

Adjust the speaker volume using VOLUME .

The number of calls in the call counter will not reset until you erase your messages.

Voice time/day stamp:

During playback, a synthesized voice will announce the time and day when each message was recorded.

NEW MSGS. indicator

CALLS (call counter)

Station key panel

VOLUME

NEW MSGS. PLAY BACK

( ALL MSGS. PLAY BACK when the station key panel is opened.)

Erasing recorded messages

Erase unnecessary messages to prevent memory from becoming full.

Erasing specific messages from memory

Press ERASE when the message you want to erase is playing.

Erasing all messages in common memory

1. Press ERASE after listening to all of the messages.

Display: CLEAR MESSAGES?

YES:PRESS SET

To cancel erasing, press STOP .

2.Press START/COPY/SET .

ERASE COMPLETED

ERASE

STOP

START/COPY/SET

26

For Assistance, Call 1-800-435-7329