5. SMS
LConsult your service provider for more information.
1Press {j/OK}.
2Select “SMS”, then press {>}.
3Select “Public”, then press {>}.
4Select “Settings”, then press {>}.
5Enter “0000” (default base unit PIN).
LIf you changed the PIN, enter it (page 80).
6Select “Message Centre1” or “Message Centre2”, then press {>}.
7Edit the number as necessary, then press
{j/OK}.
8Select “Save”, then press {>}.
9Press {ih}.
Note:
LIf your phone is connected to a PBX, you need to add the PBX line access number and a dialling pause to the beginning of the Message Centre 1 phone number.
5.4 Sending a message
{k} {j/OK}
{R} 
{ih}
{>}{e}{v}
{C/T}
5.4.1Writing and sending a new message
1Press {j/OK}.
2Select “SMS”, then press {>}.
3To access the public mailbox Select “Public”, then press {>}.
To access a private mailbox
Select the desired mailbox, press {>}, then enter its password.
4Select “Create”, then press {>}.
LIf “^Use Last Text?” is displayed, you can use the text from the last message you created by pressing {e}. This message will be displayed only if the last
message was created using the same mailbox you selected in step 3.
5Enter the message (page 46), then press
{j/OK}.
6Enter the destination telephone number.
Manually:
Enter the number, up to 20 digits.
Using the handset phonebook:
1.Press {k}.
2.Press {e} or {v} repeatedly to display the desired item.
L You can also find an item using one of the search methods on page 32.
3.Press {j/OK}.
Using the Caller ID list:
1.Press {e} or {v} repeatedly to select the party.
2.Press {j/OK}.
Using the redial list:
1.Press {R} repeatedly to select the telephone number.
2.Press {j/OK}.
7If you wish to send the message to the other party’s mailbox, enter the other party’s mailbox number after the destination phone number.
Example: The other party’s phone number is 123456 and their mailbox number is 1. Enter 1234561.
LTo send the message to the public mailbox, skip to step 8.
8Press {j/OK}.
9To save the message, select “Yes”, then press {>}.
L To send the message without saving it, select “No”, then press {>}.
10To send the message, select “Send”, then press {>}.
L To cancel sending, press {ih}.
Note:
LThis unit supports SMS messages of up to 612 characters, however, the maximum number of characters you can send or receive may be limited by your SMS service provider. Consult your SMS service provider for details.
LIf your message contains over 160 characters, “@@Long Message@@” is displayed. Your service provider may treat
42
