Panasonic KX-FC231NZ, KX-FC235AL manual Advanced features

10. Programmable Features

10.3 Advanced features

Code #22: Setting the journal report to print automatically

AUTO JOURNAL

=ON[±]

“ON” (default): The unit will print a journal report automatically after every 30 new fax transmissions and receptions (page 49). “OFF”: The unit will not print a journal report, but will keep a record of the last 30 fax transmissions and receptions.

Code #23: Sending documents overseas

OVERSEAS MODE

=ERROR [±]

If you cannot send a fax overseas even if the number is correct and the line is connected, activate this feature before sending the fax.

This feature improves the reliability by reducing the transmission speed.

“ERROR” (default): When the previous fax transmission fails and you wish to re-send the document.

“NEXT FAX”: This setting is effective only for the next attempted fax transmission. After transmission, the unit will return to the previous setting.

“OFF”: Deactivates this feature.

Note:

LThis feature is not available for broadcast transmission.

LCalling charges may be higher than usual.

Code #25: Sending a fax at a specific time

DELAYED SEND

=OFF [±]

This feature allows you to take advantage of low- cost calling hours offered by your telephone company. This feature can be set up to 24 hours in advance of the desired time.

To send a document:

1.Insert the document.

2.If necessary, press {A} or {B} repeatedly to select the desired resolution (page 48).

3.Press {MENU}.

4.Press {#} then {2}{5}.

5.Press {A} or {B} repeatedly to select “ON”.

6.Press {SET}.

7.Enter the fax number.

8.Press {SET}.

9.Enter the transmission start time.

LIf you select 12-hour time entry when you

set the date and time (page 26), press {*} repeatedly to select “AM” or “PM”.

LIf you selected 24-hour time entry when you set the date and time (page 26), the time is set using 24-hour time entry.

10.Press {SET}.

11.Press {MENU}.

Note:

LTo cancel after programming, press {STOP} then {SET}.

Code #26: Setting the Caller ID list to print automatically

AUTO CALL. LIST

=OFF [±]

“ON”: The Caller ID list will be printed automatically each time the base unit logs 30 different callers (page 36).

“OFF” (default): The Caller ID list will not be printed, but the base unit will keep a record of the information for the last 30 different callers.

Code #31: Activating the Distinctive Ring feature

DISTINCTIVE RING

=OFF [±]

See page 58 for details.

Code #34: Setting the quick scan

QUICK SCAN

=OFF [±]

This feature is helpful when you want to remove the document for other uses, because the unit will release the document before sending or copying.

“ON”: The unit will scan the document and store it into memory first, then the unit will start sending or copying.

“OFF” (default): Deactivates this feature.

Note:

LIf the document exceeds the memory capacity, sending of the whole document or copying of the exceeded document will be cancelled and this feature will be turned OFF automatically.

However this feature will not turn OFF automatically when:

–you enter the number of copies, and memory becomes full during copying.

68