5. SMS
long messages differently from other messages. Consult your SMS service provider for details.
L“Invalid Number” is displayed if you try to send a message to a phone number saved in
the handset phonebook, Caller ID list, or redial list that is over 20 digits long.
LWhen sending a message, “Sending Message” is displayed momentarily, then
“Transferring Message” is displayed.
LIf your unit is connected to a PBX, store the PBX line access number (page 45).
5.4.2Displaying / Sending a saved message
1Press {j/OK}.
2Select “SMS”, then press {>}.
3To access the public mailbox Select “Public”, then press {>}.
To access a private mailbox
Select the desired mailbox, press {>}, then enter its password.
4Select “Send List”, then press {>}.
5To display a saved message, press {e} or {v} repeatedly to select the message, then press {j/OK}.
L Messages are displayed in chronological order and by destination phone number.
6To send the message, press {j/OK}, select “Send”, then press {>}.
–To send the message to the same destination number, press {j/OK}, then continue from step 9, “5.4.1 Writing and sending a new message”, page 42.
–To send the message to a different destination number, erase the displayed number by pressing {C/T}, then continue from step 6, “5.4.1 Writing and sending a new message”, page 42.
5.4.3 Editing a saved message
5Press {e} or {v} repeatedly to select the message, then press {j/OK}.
6Press {j/OK}, select “Edit Message”, press {>}, then continue from step 5, “5.4.1 Writing and sending a new message”, page 42.
5.4.4 Erasing saved messages
1Press {j/OK}.
2Select “SMS”, then press {>}.
3To access the public mailbox Select “Public”, then press {>}.
To access a private mailbox
Select the desired mailbox, press {>}, then enter its password.
4Select “Send List”, then press {>}.
5Press {e} or {v} repeatedly to select the message, then press {j/OK}.
6Press {j/OK}, select “Erase”, then press
{>}.
L To erase all messages in the selected mailbox, select “Erase All”, then press
{>}.
7Select “Yes”, then press {>}.
8Press {ih}.
5.5 Receiving a message
When an SMS message is received:
–a tone is heard (if the ringer is turned OFF, this tone is not heard)
–“Receiving SMS Message” is displayed
–Fis displayed
–the message centre number is stored in the Caller ID list (page 37)
1Press {j/OK}.
2Select “SMS”, then press {>}.
3To access the public mailbox Select “Public”, then press {>}.
To access a private mailbox
Select the desired mailbox, press {>}, then enter its password.
4Select “Send List”, then press {>}.
{j/OK}
{C}
{s}
{>}{e}{v}
{ih}
43
