10. Programmable Features
10.2 Basic features
Code #01: Setting the date and time
SET DATE & TIME
PRESS SET
See page 26 for details.
Code #02: Setting your logo
YOUR LOGO
PRESS SET
See page 26 for details.
Code #03: Setting your fax number
YOUR FAX NO.
PRESS SET
See page 28 for details.
Code #04: Printing a sending report
SENDING REPORT
=ERROR [±]
To print a sending report for fax transmission results (page 49).
“ERROR” (default): A sending report will be printed only when fax transmission fails.
“ON”: A sending report will be printed after every transmission.
“OFF”: Sending reports will not be printed.
Code #06: Changing the ring setting in FAX ONLY mode
FAX RING COUNT
RINGS=2 [±]
To change the number of rings before the unit answers a call in FAX ONLY mode.
You can select “2” (default), “3”, “4”, “5”, “6”, “7”, “8” or “9”.
Note:
LSet feature #77 to “FAX ONLY” (page 70) beforehand.
Code #06: Changing the ring setting in TAM/FAX mode
TAM RING COUNT
RINGS=2 [±]
To change the number of rings before the unit answers a call in TAM/FAX mode. You can select “2” (default), “3”, “4”, “5”, “6”, “7”, “8”, “9”, “TOLL SAVER” or “RINGER OFF”. See page 55 for details.
Note:
LSet feature #77 to “TAM/FAX” (page 70) beforehand.
Code #10: Changing the maximum recording time for incoming messages
RECORDING TIME
=VOX [±]
“VOX” (default): Unlimited.
“1
Code #11: Setting the remote operation ID
REMOTE TAM ID
=ON[±]
1.Press {MENU}.
2.Press {#}, then {1}{1}.
3.Press {A} or {B} repeatedly to select “ON”.
4.Press {SET}.
5.Enter any
L The default ID is “222”.
6.Press {SET}.
7.Press {MENU}.
Code #17: Setting the ring tone for outside calls
EXT. RINGTONE
=A[±]
To set the base unit ring tone from one of 3 tones for outside calls. You can select “A” (default), “B” or “C”.
Note:
LTo set the handset ring tone, see page 75.
67
