Panasonic KX-FC231NZ, KX-FC235AL specification

10. Programmable Features

10.5.10 Other options

Changing the base unit PIN (personal identification number)

For security, the base unit PIN must be entered when changing certain settings. The default PIN is “0000”.

Important:

LIf you change the PIN, please make note of your new PIN. The unit will not reveal the PIN to you. If you forget your PIN, consult your nearest Panasonic service centre.

1.Press {j/OK}.

2.Select “Base Unit Setup”, then press

{>}.

3.Enter “0000” (default base unit PIN).

LIf you changed the PIN, enter it.

4.Select “Other Options”, then press {>}.

5.Select “Base Unit PIN”, then press {>}.

6.Enter the new 4-digit base unit PIN, then press {j/OK}.

7.Press {ih}.

Resetting handset programming that uses the base unit PIN

Handset programming that uses the base unit PIN will be reset (page 73).

1.Press {j/OK}.

2.Select “Base Unit Setup”, then press

{>}.

3.Enter “0000” (default base unit PIN).

LIf you changed the PIN, enter it (page 80).

4.Select “Other Options”, then press {>}.

5.Select “Reset Base”, then press {>}.

6.Select “Yes”, then press {>}.

7.Press {ih}.

Note:

LThe following items will also be deleted or reset to their default settings:

–All SMS-related settings and messages (KX-FC235AL only, page 41)

–Caller ID list for the handset (page 37)

LThe repeater mode will be retained (page 82).

80

Image 82

Panasonic KX-FC231NZ, KX-FC235AL manual Changing the base unit PIN personal identification number

Contents

KX-FC231NZ How to use the operating instructions Open Handset Location of ControlsBase unit Buttons Listed in alphabetical order KX-FC231NZ Attach your sales receipt hereKX-FC235AL Trademarks For Australian users For New Zealand users Important information for Australian users InstallationService difficulties Instructions to customer Important safety instructions Battery For best performance Before calling back Phonebook 103 101102 105 For Australian users Included accessoriesQuantity For New Zealand users For Users in New Zealand General Warning Accessory informationAvailable accessories Important Notice Button descriptions of the base unit Button descriptions of the handset Display icons Display descriptions of the handsetDisplay icon Meaning Overview Ink film installation / replacement Installing the ink film Correct Incorrect Paper tray Replacing the ink film Recording paper CorrectIncorrect Replacing the batteries Battery installation / replacementInstalling the batteries Panasonic batteries. See page 11 for Connections Battery icons Battery strength Battery chargeBattery strength Battery life Power OFF Turning the handset power ON/OFFPower on Base unit help function INT Adjusting handset Adjusting base unit VolumeRinger volume Ring tone Example 315 PM 12-hour time entry Date and timeWith the handset Example 10 August, 2005 Press 10 08 SET Menu Your logoWith the base unit Example 315PM 12-hour time entry 1. Press 03 To enter your logo Example Bill To select characters using a or BKeypad Characters To change uppercase or lowercase letters Example +64 9 Your fax numberYour FAX no Press SET To delete a number Making phone calls To turn key lock OFF, press j/OK for about 2 seconds MuteKey lock Digital SP-PHONE Mute Answering phone calls INT. Any key answer featureAuto talk feature Handset phonebook Categories Making a phone call using the phonebookEditing a stored item One touch dial Erasing stored itemsChain dial Erasing a stored item Base unit phonebookErase Digital SP-PHONE How Caller ID is displayed Caller ID serviceAnother method to erase a stored item Using Caller ID type Category features for Caller ID subscribersChanging category ring tones Caller ID Viewing and calling back using caller informationFAX/START Digital SP-PHONE Editing a caller’s telephone number before calling back Erasing caller information Into the base unit phonebook Storing caller information into the phonebookInto the handset phonebook To erase specific caller information Press Caller ID Voice mail service for Australian users only Call minder for New Zealand users only Turning SMS ON/OFF SMS Short Message ServiceUsing public mailbox and private mailboxes Changing SMS message centre numbers Sending a message Writing and sending a new message Editing a saved message Receiving a messageDisplaying / Sending a saved message Erasing saved messages Storing the sender’s number in the handset phonebook Displaying a received messageErasing received messages Editing the sender’s number before calling back Storing the PBX line access number for PBX users only Guide to SMS settingsChanging private mailbox settings Creating private mailboxes Character entry modes How to enter charactersAvailable character entries for SMS LetterWise character table for English Following are used for both uppercase and lowercase Sending a fax manually Stop Redial FAX/START Digital SP-PHONE Documents you can send Programming items into the broadcast memory Sending a fax using the base unit phonebookBroadcast transmission Adding a new item into the broadcast memory Sending the same document to pre-programmed parties To cancel broadcast transmissionErasing a stored item from the broadcast memory To send the same document to a one-time group of parties Selecting the way to use your fax machine Use only as a fax FAX only modeAuto receive How to receive phone calls and faxes Use mostly as a telephone TEL modeManual receive Receiving a fax manually Auto answer Activating TEL modeStop FAX/START Digital SP-PHONE Ring setting in TAM/FAX mode Activating TAM/FAX modeTAM/FAX Mode Receiving a fax automatically Auto answer on Activating FAX only mode FAX only Mode To display the junk fax prohibitor list Activating the junk fax prohibitorStoring undesired callers To print the junk fax prohibitor list Using with the ring detection feature Making a copy More copying featuresStop Start A4, Letter Setting Recording Original Paper size Document SizeDefault Legal SET MIC Stop Erase GREETING/REC GREETING/CHECK Recording your greeting messageErasing your recorded greeting message Press GREETING/REC Erasing recorded messages Listening to recorded messagesLeaving a message for others or yourself SET Stop Erase Playback For voice mail/Call minder service subscribers Operating from a remote location Remote operation using remote commandsSummary of remote operation Skip greeting message Turn OFF auto answer settingTo turn on the auto answer setting Recording a marker message Programming advanced features Programming basic featuresBase unit programming Basic features Advanced features Code #44 Setting the memory reception alert Code #42 Setting the message alertCode #43 Setting the recording time alert Code #46 Setting friendly reception Code #68 Setting the Error Correction Mode ECM Code #58 Setting the scan contrastCode #67 Setting the incoming message monitor Code #76 Setting the connecting tone Direct commands for programming features Program code and direct command button #36 Receiving reduction 72% 86% OFF #76 Connecting tone#80 Set default YES #39 Display contrast Handset programming Programmable Features Programmable functions AlarmNight mode Ringer options Display setup Call options Other options Setting pause length Programmable functions using the base unit PINChanging the recall time Storing/changing emergency numbers Setting call restrictionSelecting area codes to be deleted automatically Resetting handset programming that uses the base unit PIN Changing the base unit PIN personal identification number Operating additional units Registering a handset to a base unit Handset locator Cancelling a handsetCancelling a base unit Increasing the range of the base unit Intercom between handsets Example When handset 1 calls handset HandsetExample When handset 1 transfers a call to handset Handset Transferring calls between handsets / Conference calls Copying a stored item Copying handset phonebook itemsCopying all stored items LetterWise character table for English KX-FC235AL only Available character entries for the handsetAlphabet character table ABC Numeric entry table Extended 2 character table O Greek character table M Extended 1 character table NCyrillic character table P Error messages Reports Error messages Base unit display Display Cause and Solution Transmission error occurred. Try again Service personnelPlease use genuine Panasonic replacement film Unnecessary messages Initial settings When a function does not work, check hereGeneral Problem Cause & Solution Handset does not Problem Cause & Solution Speakerphone is notReturns to standby mode Charging but the battery Is pressed Problem Cause & SolutionDocuments using Static, sound cuts in/out Fax sending Fax receiving Documents automatically Receiving modeWhen an extension Display shows Copying Answering machine SMS KX-FC235AL only If a power failure occurs When the recording paper has jammed in the unit Recording paper jams Correct When the recording paper was not fed into the unit properly START1 Document jams sending Document feeder / scanner glass cleaning Do not use paper products, such as paper towels or tissues Thermal head cleaning 104 Reference lists and reports Base unit only Specifications Mass Weight Approx g Duplex procedureRF transmission power Approx mW Operating environment Standard Index 109 110 111 Manufacturer Panasonic Communications Malaysia Sdn. Bhd Sales Department Panasonic Australia Pty. LimitedPanasonic New Zealand Limited Global web site Copyright PFQX2248ZA CM0605DT0