1. Introduction and Installation
14
Installation
1.7 Ink film
The included film roll is a starter ink film.
1Open the front cover.
2Release the back cover by pushing the green button
(1).
3Open the back cover.
4Insert the blue gear of the ink film roll into the front
left slot of the unit (2) and the white gear of the ink
film roll into the rear left slot of the unit (3).
LThe ink film is safe to touch and will not rub off on
your hands like carbon paper.
LMake sure the blue gear (2) and white gear (3)
are installed as shown.
5Turn the blue gear (4) in the direction of the arrow
until the ink film is tight (5) and at least one layer of
ink film is wrapped around the blue core (6).
1
3
2
4
5
FC255AL-PFQX2639ZA-en.book Page 14 Friday, April 21, 2006 1:50 PM