8. Programmable Features
58
8.2.2 Time settings
Alarm
An alarm will sound for 3 minutes at the set time once or
daily. Set the date and time beforehand (page 20).
1. " i N i #
2. “Time Settings” i #
3. “Alarm” i # 2 times
4. Select an alarm mode. i #
5. Enter the desired hour and minute. i #
6. Select the desired ringtone. i #
7. “Save” i # i {ih}
LWhen the alarm is set, e is displayed.
Note:
LTo stop the alarm, press any dial key.
LWhen in talk or intercom mode, the alarm will not
sound until the call has ended.
LIf you select “Once”, the setting will change to “Off”
after the alarm sounds.
8.2.3 Display Setup
Display language
1. {ih} i "
2. Select N by pressing {^}, {V}, {<}, or {>}. i #
3. Press {^} or {V} to select “Display Setup”. i
#
4. Press {^} or {V} to select “Select Language”.
i #
5. Press {^} or {V} to select the desired language. i
# i {ih}
Note:
LIf you select a language you cannot read, press
{ih}, ", press {V}, press #, press {V} 2
times, press #, press {V} 3 times, press #,
select the desired language, then press #. Press
{ih}.
8.2.4 Call options
Setting call restriction
You can restrict selected cordless handsets/base unit
from dialling certain numbers. You can assign up to 6
phone numbers to be restricted, and select w hich
cordless handsets/base unit will be restricted. Storing
area codes here will prevent the restricted cordles s
handsets/base unit from dialling any phone number in
that area code.
1. " i L i #
2. “Call Options” i #
3. “Call Restrict” i #
4. Enter “0000” (default base unit PIN).
LIf you forget your PIN, contact our service
personnel.
5. To restrict the base unit, press {0}.
To restrict a cordless handset, press the desired
cordless handset number.
LAll the registered cordless handset numbers will
be displayed.
LFlashing numbers indicate call restriction is
turned ON for the corresponding cordless
handset/base unit.
LTo turn call restriction OFF for a cordless
handset/base unit, press the number again. The
number will stop flashing.
6. #
7. Select a memory location. i #
8. Enter the phone number or area code to be restricted
(up to 8 digits). i # i {ih}
LTo erase a restricted number, press {C/T}.
“Off”Turns alarm OFF. Press # again,
then press {ih} to finish.
“Once”The alarm sounds once at the set time.
Enter the desired day and month.
“Daily”An alarm sounds daily at the set time.
FC255AL-PFQX2639ZA-en.book Page 58 Friday, April 21, 2006 1:50 PM