11. Help
66
11.2.2 Cordless handset
“MESSAGE FULL”LThere is no room left in memory to record voice messages. Erase
unnecessary messages (page 46, 47).
“MODEM ERROR”LThere is something wrong with the unit’s modem. Contact our service
personnel.
“NO FAX REPLY”LThe other party’s fax machine is busy or has run out of recording paper. Try
again.
“OPEN CABINET
CHECK FILM SLACK”
“OPEN CABINET
CHECK FILM TYPE”
LPlease use genuine Panasonic replacement film (page 9).
LThe ink film is slack. Tighten it (see step 5 on page 14).
LThe fax machine is positioned near appliances such as TVs or speakers
which generate an intense magnetic field.
“PAPER JAMMED”LA recording paper jam occurred. Remove the jammed paper (page 74).
LYou forced the recording paper into the paper tray too strongly. Remove all
of the installed paper, and re-install it gently.
“PLEASE WAIT”LThe unit is checking that there is no slack or crease in the ink film. Wait for
a moment while the check is completed.
“POLLING ERROR”LThe other party’s fax machine does not support polling. Check with the
other party.
“RECORDING ERROR”LThe greeting message you recorded was under 1 second long. Record a
longer message.
“REDIAL TIME OUT”LThe other party’s fax machine is busy or has run out of recording paper. Try
again.
“REMOVE DOCUMENT”LThe document is jammed. Remove the jammed document (page 75).
LPress {STOP} to eject the jammed paper.
“SERIAL ERROR”LThere is something wrong with the unit and the base unit will not work.
Contact our service personnel.
“TRANSMIT ERROR”LA transmission error occurred. Try again.
LIf you send a fax overseas, try the following:
– Make sure the other party’s number is a fax number.
– Use the overseas transmission mode (feature #23 on page 51).
– Add 2 pauses at the end of the telephone number or dial manually.
“UNIT OVERHEATED”LThe unit is too hot. Stop using the unit for a while and let the unit cool down.
Display Cause & Solution
“Answer Sys. Full”LErase unnecessary messages (page 46, 47).
“Error”LRecording was too short. Try again.
“Failed”LPhonebook copy failed. Confirm the destination unit is in standby mode and
try again.
“Incomplete”LThe destination unit’s phonebook memory is full. Erase the unnecessary
phonebook items from the destination unit and try again.
“Invalid Number”LYou tried to send an SMS message to a phone number saved in the base
unit phonebook, cordless handset phonebook, Caller ID list, or redial list
that is over 20 digits long.
Display Cause & Solution
FC255AL-PFQX2639ZA-en.book Page 66 Friday, April 21, 2006 1:50 PM