2. Preparation
17
2PreparationConnections and Setup
2.1 Connections
Important:
LThe unit will not function when there is a power
failure. To make calls in emergency situations,
you should connect a telephone that can
function during a power failure to the telephone
line.

2.1.1 Base unit

Caution:
L When you operate this product, the power outlet
should be near the product and easily
accessible.
LBe sure to use the telephone line cord included in
this unit.
LDo not extend the telephone line cord.
Note:
LIf any other device is connected to the same
telephone line, this unit may disturb the network
condition of the device.
LIf you use the unit with a computer and your i nternet
provider instructs you to install a filter (3), please
connect the telephone line cord of the unit.

2.1.2 Charger unit

Caution:
LUSE ONLY WITH the included Panasonic AC
adaptor.
LThe AC adaptor must remain connected at all
times. (It is normal for the adaptor to feel warm
during use.)
LThe AC adaptor should be connected to a
vertically oriented or floor-mounted AC outlet.
Do not connect the AC adaptor to a ceiling-
mounted AC outlet, as the weight of the adaptor
may cause it to become disconnected.
1Telephone line cord
LConnect to a single telephone line jack.
2Power cord
LConnect to a power outlet (220 V – 240 V, 50/60
Hz).
2
1

(For Australian

users)

1AC adaptor
LConnect to a power outlet (220 V – 240 V, 50/60
Hz).
2Hooks
LFasten the AC adaptor cord to prevent it from
being disconnected.
3Screws (not included)
LThe charger can be mounted on the wall, if
required.
3

25 mm

3

2
1
FC255AL-PFQX2639ZA-en.book Page 17 Friday, April 21, 2006 1:50 PM