7. Answering Machine
45
7Answering MachineGreeting
7.1 Recording your greeting messageThe unit has a pre-recorded greeting message for
TAM/FAX mode. If you record your own greeting
message, it will be played instead of the pre-recorded
greeting message when a call is received.
The maximum recording time of your greeting message
is either 16 seconds (default) or 60 seconds. We
recommend you record a message of less than 12
seconds to make it easier to receive faxes.
Make sure feature #77 is set to “TAM/FAX” beforehand
(page 55).
1{GREETING REC}
LA long beep will sound.
2Speak clearly about 20 cm away from {MIC}.
3When finished recording, press {STOP}.
Note:
LYou can change the maximum TAM/FAX greeting
message time to 60 seconds (feature #54 on page
54).
– If you change the setting to 60 seconds, we
recommend that you tell the caller in your
TAM/FAX greeting message to press *9 before
starting the fax transmission.
– If you change the setting from 60 seconds to 16
seconds, your current greeting message will be
deleted. The pre-recorded greeting message will
be played when a call is received.
LIf you change the maximum recording time of
incoming messages to “GREETING ONLY” (page
48, feature #10 on page 51), the unit will answer a
call with your current greeting message, and then
hang up. Re-record your greeting message to inform
the caller that the unit will not record any incoming
messages.
To check the greeting message
Press {GREETING CHECK}.
LThe unit will play the greeting message.
7.1.1 Erasing your recorded greeting
message
1{GREETING CHECK}
LTo cancel erasing, press {STOP}.
2{ERASE}
Note:
LIf you erase your TAM/FAX greeting message, the
pre-recorded greeting message will be played when
a call is received.
{MIC}
{GREETING CHECK}
{GREETING REC}
{ERASE}
{STOP}
FC255AL-PFQX2639ZA-en.book Page 45 Friday, April 21, 2006 1:50 PM