Panasonic KX-NCP500 Packet Sampling Time for G.729A, FAX Detection Ability, DTMF

Feature Guide References
None
Packet Sampling Time for G.729A
Specifies the time interval between measurements (samples) of sound data during a conversation. The smaller
this number, the higher the quality of the transmitted sound.
Value Range
10 ms, 20 ms, 30 ms, 40 ms, 50 ms, 60 ms
Maintenance Console Location
3.9 [1-1] Slot—Shelf Property - Virtual IP Gateway
Programming Manual References
None
Feature Guide References
None
FAX Detection Ability
Enables the use of the FAX Detection Ability feature. Since fax signals using a codec other than G.711 cannot
be received accurately at the destination, this feature automatically switches the codec to G.711 to enable
end-to-end fax signal relay over the network.
Value Range
Disable, Enable
Maintenance Console Location
3.9 [1-1] Slot—Shelf Property - Virtual IP Gateway
Programming Manual References
3.9 [1-1] Slot—Shelf Property - Virtual IP Gateway—Incoming Call— Voice Codec Priority 1st
Feature Guide References
None
DTMF
Specifies the type of DTMF tone to be sent out.
Value Range
Inband, Outband (RFC2833), Outband (H.245)
152 PC Programming Manual
3.9 [1-1] Slot—Shelf Property - Virtual IP Gateway