Panasonic KX-NCP500 PT OperationPT Ring Off Setting, PT OperationAutomatic Answer for Call from CO after, PT OperationAutomatic Hold by ICM / CO / ICD Group key

Programming Manual References
None
Feature Guide References
None
PT Operation—PT Ring Off Setting
Specifies whether incoming call ringing can be turned off at individual extensions. If disabled, users cannot
prevent incoming calls from ringing.
Value Range
Disable, Enable
Maintenance Console Location
4.18 [2-9] System Options
Programming Manual References
None
Feature Guide References
1.1.3.2 Ring Tone Pattern Selection
PT Operation—Automatic Answer for Call from CO after
Specifies the number of times a PT in Hands-free Answerback mode will ring before a conversation is
established automatically when it receives a call from a trunk.
Value Range
No Ring, 1 Ring, 2 Rings, 3 Rings
Maintenance Console Location
4.18 [2-9] System Options
Programming Manual References
None
Feature Guide References
1.4.1.4 Hands-free Answerback
PT Operation—Automatic Hold by ICM / CO / ICD Group key
Selects whether calls are disconnected or held when an INTERCOM, PDN, CO, or ICD Group button is pressed
while having a conversation.
PC Programming Manual 489
4.18 [2-9] System Options