Panasonic KX-NCP500 Private NetworkTIE Call by Extension Numbering (Optional SD Card Required), System WirelessOut of Range Registration

Maintenance Console Location
4.18 [2-9] System Options
Programming Manual References
None
Feature Guide References
1.18.1 Caller ID
Private Network—TIE Call by Extension Numbering (Optional SD Card
Required)
Enables extensions at two PBXs connected in a network (not including a VoIP network) to have the same
leading number. For example, extension 101 is registered at PBX 1, and extension 102 is registered at PBX
2. Only the Extension Number Method is supported.
If disabled, different leading numbers need to be assigned for extensions at each PBX.
Value Range
Disable, Enable
Maintenance Console Location
4.18 [2-9] System Options
Programming Manual References
11.1 [9-1] TIE Table— Leading Number
Feature Guide References
1.30.1 TIE Line Service
System Wireless—Out of Range Registration
Selects whether the PBX can set the status of a PS to Out of Range if no signal is received from the PS for a
preset length of time. This feature must be enabled to allow PS roaming.
Value Range
Disable, Enable
Maintenance Console Location
4.18 [2-9] System Options
Programming Manual References
4.5 [2-3] Timers & Counters— System Wireless—PS Out of Range Timer
504 PC Programming Manual
4.18 [2-9] System Options