Panasonic KX-NCP500 12.2 [10-2] DIL Table & Port Settings

12.2 [10-2] DIL Table & Port Settings
Direct In Line (DIL) or Direct Dialling In (DDI)/Direct Inward Dialling (DID) can be selected for each trunk as
the method of distributing incoming trunk calls to certain destinations. For each trunk to which DIL distribution
is set, different destinations can be programmed depending on the time mode (day/lunch/break/night). If
desired, Calling Line Identification (CLI) distribution can be used in conjunction with DIL distribution.
DIL
For each trunk to which DIL distribution is set, different DIL destinations can be programmed depending on
the time mode (day/lunch/break/night). Generally, DIL distribution is used for trunk calls from analogue trunks.
Tenant number and VM trunk group number can also be programmed for each trunk.
To assign DIL destination numbers, enter directly or click Destination Setting (see 2.1.6 Extension Number
Setting).
Shelf
Indicates the shelf type (reference only).
Value Range
Physical, Virtual
Maintenance Console Location
12.2 [10-2] DIL Table & Port Settings
Programming Manual References
None
Feature Guide References
None
Slot
Indicates the slot position of each trunk card (reference only).
Value Range
Slot number
Maintenance Console Location
12.2 [10-2] DIL Table & Port Settings
Programming Manual References
None
Feature Guide References
None
PC Programming Manual 825
12.2 [10-2] DIL Table & Port Settings