10.8 [8-7] Authorisation Code for TRG
An Authorisation code can be specified for each trunk group. The Authorisation codes entered here can be
added to user-dialled numbers by adding "G" to the Modify Command specified on the Carrier tab of screen
10.6 [8-5] Carrier.
8 trunk groups are displayed on the screen at a time. To display other groups, click the applicable tab.

Authorisation Code for Trunk Group—TRG 01–TRG 64

Specifies the Authorisation code of each carrier for each trunk group.
Value Range
Max. 10 digits (consisting of 0–9, *, and #)
Maintenance Console Location
10.8 [8-7] Authorisation Code for TRG
Programming Manual References
10.6 [8-5] Carrier—CarrierModify Command
Feature Guide References
1.10.1 Automatic Route Selection (ARS)
808 PC Programming Manual
10.8 [8-7] Authorisation Code for TRG