Panasonic KX-NCP500 4.7 [2-4] Week TableTime Setting

4.7 [2-4] Week Table—Time Setting
The start times of 4 different time blocks can be programmed for each day of the week, for the selected Time
Table, as well as the start and end times of up to 3 break periods.
1. Day/Lunch/Night—Day1 Start, Lunch Start, Day2 Start, Night Start—Setting
Enables the setting of the start time for each time block.
Value Range
Disable, Enable
Maintenance Console Location
4.7 [2-4] Week Table—Time Setting
Programming Manual References
None
Feature Guide References
2.2.3 Tenant Service
2.2.4 Time Service
1. Day/Lunch/Night—Day1 Start, Lunch Start, Day2 Start, Night Start—Hour,
Minute
Specifies the start time for each time block. Times can only be set when 1. Day/Lunch/Night—Day1 Start,
Lunch Start, Day2 Start, Night Start—Setting is set to Enable.
Value Range
00:00–23:59
Maintenance Console Location
4.7 [2-4] Week Table—Time Setting
Programming Manual References
None
Feature Guide References
2.2.3 Tenant Service
2.2.4 Time Service
2. Break—Break 1–3 Start—Setting
Enables the setting of the start time for each break period.
422 PC Programming Manual
4.7 [2-4] Week Table—Time Setting