Programming Manual References
None
Feature Guide References
1.22.1 E1 Line Service
Trunk Property
Selects the trunk property of the E & M channel.
Value Range
Public: Use the DIL/DDI/DID method to distribute incoming trunk calls.
Private: Use the TIE line service between two or more PBXs.
Maintenance Console Location
3.42 [1-1] Slot—Port Property - E1 Port
Programming Manual References
None
Feature Guide References
1.1.1.1 Incoming Trunk Call Features—SUMMARY
1.21.1.1 Integrated Services Digital Network (ISDN)—SUMMARY
1.30.1 TIE Line Service
CO Dial Mode
Selects the type of signal used to dial out to a trunk.
If MFC-R2 is selected, the PBX (not the telephone company) sends a dial tone to the caller when making a
trunk call using an E1 line.
Value Range
DTMF, Pulse, MFC-R2
Maintenance Console Location
3.42 [1-1] Slot—Port Property - E1 Port
Programming Manual References
None
Feature Guide References
1.5.4.4 Dial Type Selection
1.22.1 E1 Line Service
366 PC Programming Manual
3.42 [1-1] Slot—Port Property - E1 Port