from the LAN and then connect the PC with an Ethernet straight cable using 192.168.0.101 for the IP
address of the IPCMPR card.
*1 Valid IP address range: "1.0.0.0" to "223.255.255.255"
*2 Valid IP address range: "1.0.0.0" to "223.255.255.255"
*3 Valid subnet mask address range: "0–255.0–255.0–255.0–255" (except 0.0.0.0 and 255.255.255.255)
*4 Valid IP address range: "0.0.0.0" to "223.255.255.255"
PBX Web Manager
It is possible to use a PC with the Maintenance Console (PBX Unified PC Maintenance Console) installed, as
a web server. This allows users to configure the PBX via a web browser on a local client, or a remote PC
through the Internet.

PBX Server

Client

Remote PC

IP Network
If Maintenance Console is installed on the client PC, a web server is not necessary.

PBX Server/Client

Accessing PBX Web Manager
PBX Web Manager can be enabled during the installation of the Maintenance Console. It can also be enabled
in Options.
Note
•When starting the Maintenance Console, if there is less than 80 MB of available memory, this feature
is automatically disabled.
•Only one user can access Maintenance Console or PBX Web Manager at any given time.
To start PBX Web Manager:
1. If the PC is not the web server:
Launch a web browsing application and enter the
following URL:
"http://xxx:8181/INDEX.ASPX"
’xxx’ should be replaced with the server’s IP address.
If the PC is the web server:
Double-click the PBX Web Manager icon in the system
tray( ).
20 PC Programming Manual
1.2.1 Installing and Starting the Maintenance Console