Panasonic KX-NCP500 12.5 [10-3] DDI/DID TableName Generate

12.5 [10-3] DDI/DID Table—Name Generate
Name Generate allows DDI/DID names to be programmed at once for a set of locations in series.
If a name generated here is longer than 20 characters, the additional characters will be discarded.
Beginning Entry Location
Specifies the number of the first location to be programmed.
Value Range
1–1000
Maintenance Console Location
12.5 [10-3] DDI/DID Table—Name Generate
Programming Manual References
12.3 [10-3] DDI / DID Table
Feature Guide References
1.1.1.3 Direct Inward Dialling (DID)/Direct Dialling In (DDI)
Number to Generate
Specifies the number of locations to be programmed.
Value Range
1–1000
Maintenance Console Location
12.5 [10-3] DDI/DID Table—Name Generate
Programming Manual References
12.3 [10-3] DDI / DID Table
Feature Guide References
1.1.1.3 Direct Inward Dialling (DID)/Direct Dialling In (DDI)
No. of Digits to Delete
Specifies the number of digits to be deleted from the start of a DDI/DID number when using it as part of the
DDI/DID name.
Value Range
0–32
840 PC Programming Manual
12.5 [10-3] DDI/DID Table—Name Generate