3.30 [1-1] Slot—Card Property - BRI type/PRI type
The properties of the BRI or PRI card can be specified.

ISDN CO / QSIG Master / QSIG Slave—T200

Specifies the maximum time that the PBX waits for a reply after sending the L2 command to ISDN.
Value Range
0–600 ´ 100 ms
Maintenance Console Location
3.30 [1-1] Slot—Card Property - BRI type/PRI type
Programming Manual References
None
Feature Guide References
None

ISDN CO / QSIG Master / QSIG Slave—T202

Specifies the maximum time that the PBX waits for a reply after resending the request to use an ISDN line as
a TIE line.
Value Range
0–600 ´ 100 ms
Maintenance Console Location
3.30 [1-1] Slot—Card Property - BRI type/PRI type
Programming Manual References
None
Feature Guide References
1.30.1 TIE Line Service

ISDN CO / QSIG Master / QSIG Slave—T203

Specifies the length of time to detect no communication status of L2.
Value Range
0–600 ´ 100 ms
252 PC Programming Manual
3.30 [1-1] Slot—Card Property - BRI type/PRI type