Feature Guide References
1.1.1.4 Multiple Subscriber Number (MSN) Ringing Service
Tenant Number
Specifies the tenant number, to determine the Time Table by which calls are distributed depending on the time
of day.
Value Range
1–8
Maintenance Console Location
12.6 [10-4] MSN Table
Programming Manual References
3.31 [1-1] Slot—Port Property - BRI Port
4.6 [2-4] Week Table
Feature Guide References
1.1.1.4 Multiple Subscriber Number (MSN) Ringing Service
VM Trunk Group No.
Specifies the number of the VM trunk group sent to the VPS when the MSN destination is the floating extension
number of a VM (DPT) Group.
The VM trunk group number is used to allow the VPS to send the applicable greeting message to the caller.
Value Range
1–48
Maintenance Console Location
12.6 [10-4] MSN Table
Programming Manual References
3.31 [1-1] Slot—Port Property - BRI Port
Feature Guide References
1.1.1.4 Multiple Subscriber Number (MSN) Ringing Service
CLI for MSN
When CLI distribution is enabled for an ISDN-BRI line to which MSN distribution is set, incoming trunk calls
will be distributed to the CLI destinations (instead of the MSN destinations) if the caller’s identification number
is found in the System Speed Dialling Table.
CLI distribution can be enabled or disabled for each time mode (day/lunch/break/night) on a trunk basis.
844 PC Programming Manual
12.6 [10-4] MSN Table