Panasonic KX-NCP500 DDI / DID DestinationDay, Lunch, Break, Night

Feature Guide References
1.1.1.3 Direct Inward Dialling (DID)/Direct Dialling In (DDI)
DDI / DID Destination—Day, Lunch, Break, Night
Specifies the DDI/DID destination in each time mode.
Value Range
Max. 5 digits (consisting of 0–9)
Maintenance Console Location
12.3 [10-3] DDI / DID Table
Programming Manual References
4.9 [2-6-1] Numbering Plan—Main
12.4 [10-3] DDI/DID Table—Automatic Registration
Feature Guide References
1.1.1.3 Direct Inward Dialling (DID)/Direct Dialling In (DDI)
1.30.1 TIE Line Service
Tenant Number
Specifies the tenant number, to determine the Time Table by which calls are distributed depending on the time
of day.
Value Range
1–8
Maintenance Console Location
12.3 [10-3] DDI / DID Table
Programming Manual References
4.6 [2-4] Week Table
Feature Guide References
1.1.1.3 Direct Inward Dialling (DID)/Direct Dialling In (DDI)
VM Trunk Group No.
Specifies the number of the VM trunk group sent to the VPS when the DID destination is the floating extension
number of a VM (DPT) Group.
The VM trunk group number is used to allow the VPS to send the applicable greeting message to the caller.
Value Range
1–48
836 PC Programming Manual
12.3 [10-3] DDI / DID Table