Panasonic KX-TD612NZ user manual 112, To activate a pre-selected Clip or DDI/MSN number

Operation

To activate a pre-selected CLIP or DDI/MSN number

DPT/SLT

				1	CLIP	1
7	1	9	1		OR	TO
				2	DDI/MSN	31	C.Tone
					OR
					0 All
Off-hook.	Dial 7191.			Dial 1 to select CLIP or 2 to select			On-hook.
				DDI/MSN, and then enter a location
				number (1-3). To select All, dial 0.

To cancel an activation of a pre-selected CLIP or DDI/MSN number

DPT/SLT

				1	CLIP	1
7	1	9	0		OR	TO
				2	DDI/MSN	31
					OR		C.Tone
					0 All
Off-hook.	Dial 7190.			Dial 1 to select CLIP or 2 to select			On-hook.
				DDI/MSN, and then enter a location
				number (1-3). To select All, dial 0.

• Up to 3 telephone numbers for each CLIP and DDI/MSN number can be stored per extension.

•You can store a CLIP and DDI/MSN number at any location (1-3) in any order. There is no order of priority among 3 locations.

•Even though a CLIP or DDI/MSN number is stored, this feature will not be enabled unless you activate them.

•This feature is automatically disabled on deleting stored CLIP or DDI/MSN numbers.

•The Call Forwarding to CO Line (All Calls) can be set or cancelled from outside by Direct Inward System Access (DISA) function. Also, it is possible through DISA to store/delete CLIP and DDI/MSN numbers that are allowed to forward and to activate/cancel them. Refer to 2.2.8 To Access Another Party Directly from Outside (Direct Inward System Access [DISA]).

•Call forward to outside line in accordance with pre-selected CLIP and DDI/MSN numbers is not available when receiving a call from an analogue CO line. Even when a stored CLIP or DDI/MSN number is activated, call forwarding to CO line (All Calls/No Answer) will function according only to the setting as described in "Setting or cancelling the Call Forwarding features" above.

112 User Manual