Panasonic KX-TD612NZ user manual Phone no Enter Disa phone number, Disa user

Operation

Calling an external party

Any Outside Telephone

In Non Security Mode

DISA	line access	phone no.
phone no.	no.

Enter DISA phone number.

DISA OGM D.Tone

Enter line access number (9 or 81-84).

Enter phone number of the external party.

In Trunk Security Mode

		1
DISA	line access	DISA user	phone no.
phone no.	no.	code
DISA OGM	D.Tone		D.Tone
Enter DISA	Enter line	Enter pre-assigned	Enter phone
phone number.	access number	DISA user code	number of the
	(9 or 81-84).	(4-10 digits).	external party.

In All Security Mode

		1
DISA		DISA user	line access	phone no.
phone no.		code	no.	D.Tone
	DISA OGM	D.Tone
Enter DISA		Enter pre-assigned	Enter line	Enter phone
phone number.		DISA user code	access number	number of the
		(4-10 digits).	(9 or 81-84).	external party.

• *1: If you dial a wrong DISA user code, dial and try again from this point.

• If you enter a wrong DISA user code 3 times, the line will be disconnected automatically.

•In case a destination of Intercept Routing is not assigned, the call which was made by DISA function will be disconnected automatically when it is over a programmed time period.

•If Built-in Automated Attendant service is set, you can access the desired extension simply by pressing 1 digit number (0-9) according to the outgoing message.

•You can select either to direct a call to the pre-programmed Intercept Routing destination or to disconnect it without respect to the pre-programmed Intercept Routing destination (default: direct the call to the pre-programmed Intercept Routing destination) when a caller dials nothing for the pre-determined period of time (default: 5 s later) after hearing DISA OGM. System Programming is required. Consult your dealer.

54 User Manual