Panasonic KX-TD612NZ user manual 148, To request Mcid, Or switchhook

Operation

2.8.15Identifying Malicious Callers (Malicious Call Identification [MCID])

You can ask your telephone company to trace a malicious caller during a conversation or after the opposite party hangs up.

You will receive information on the malicious call later on.

To request MCID

DPT/SLT

During a conversation or within 10 seconds after the caller hangs up

TRANSFER
OR	7	3	7
C.Tone	D.Tone		OR
			C.Tone
		Dial 737.
Press TRANSFER			Talk or on-hook.
or switchhook.

• A special arrangement with the ISDN carrier is required to utilise the MCID service. Consult your dealer for further information.

•The system is designed and manufactured in accordance with the following ETS (European Telecommunication Standard) specifications:

ETS 300 130 Malicious Call Identification (MCID) supplementary service

•The MCID service is only available for calls using an ISDN line. Not available during a three- party conference call.

•After dialling 737, if you hear a reorder tone or do not hear any tone, your request is not accepted. To request MCID again, press the TRANSFER button (DPT) ; or press the switchhook lightly (SLT) and then dial 737 again. If the caller hangs up, you must try again within 10 seconds.

•This service is also available for the ISDN extension users.

Please refer to the instruction manual of your ISDN extension for further information about operation.

148 User Manual