Chapter 4
Note
ff Pressing the <RETURN> button or the <MENU> button when the menu screen is displayed returns to the previous menu.
ff Some items may not be adjusted or used for certain signal formats to be input to the projector. The menu items that cannot be adjusted or used are shown in gray characters, and they cannot be selected.
ff Some items can be adjusted even if signals are not input.
ff Individual adjustment screen is cleared automatically if no operation is performed for approximately five seconds. ff For menu items, refer to “Main menu” (x page 42) and
ff The cursor color depends on the settings of the [OSD DESIGN] menu (x page 64). The selected item is displayed with the yellow cursor by default.
Resetting adjustment values to the factory default
If the <DEFAULT> button on the remote control is pressed, the values adjusted in the menu items are restored to the factory default settings.
button
1)Press the <DEFAULT> button on the remote control.&2175$67
Note
ff You cannot reset all the settings to the factory default at a time.
ff To reset all the settings adjusted in the
ff Some items cannot be reset by pressing the <DEFAULT> button. Adjust each item manually.
ff The square mark under the bar scale in the individual adjustment screen indicates the factory default setting. The position of the square mark varies by the selected input signals.
&XUUHQWDGMXVWPHQWYDOXH
)DFWRU\GHIDXOWVHWWLQJ
Setting the on-screen display to show/hide
If you press the <MENU> button on the control panel or the remote control for at least three seconds, the
Note
ff If the [SECURITY] menu → [TEXT DISPLAY] is [ON], the
Main menu
The main menu consists of the following 11 items.
When a main menu item is selected, the screen changes to a
| Main menu item | Page |
|
|
|
| [PICTURE] | 46 |
|
|
|
| [POSITION] | 51 |
|
|
|
| [ADVANCED MENU] | 55 |
|
|
|
| [DISPLAY LANGUAGE] | 58 |
|
|
|
| [DISPLAY OPTION] | 59 |
|
|
|
| [PROJECTOR SETUP] | 69 |
|
|
|
42 - ENGLISH