Paradyne 8510 RADSL, 8310 MVLt manual Card Status Options 3, Download Code a or Apply Download B

8310 MVL and 8510 RADSL Card Configuration

Table 4-1. Card Status Options (3 of 3)

Download Code (Download Code and Apply Download) A-A-F (A and B)

Gives the user the ability to download a new version of code and apply the downloaded code. For further information on this feature, see Appendix A, Download Code.

Download Code (A) or Apply Download (B)

Download Code (A)

This screen is similar to the NVRAM Configuration Loader screen (A-A-D).

Image File Name ± The file name may be a regular path name expression of directory names separated by a forward slash (/) ending with the file name. The total path name length must be less than 40 characters. If the TFTP server is hosted by a DOS machine, then directory and file names must follow the 8.3 naming convention imposed by DOS.

TFTP Server IP Address ± Address in nnn.nnn.nnn.nnn format. This address must be in the management domain.

Start Transfer ± Yes/No (Default = No).

Packets Sent ± Number of packets sent in download.

Packets Received ± Number of packets received in download.

Bytes Sent ± Number of bytes sent in download.

Bytes Received ± Number of bytes received in download.

Transfer Status ± Status of the download transfer.

Once the download is complete, press Ctrl-z to exit back to the Download Code submenu and select Apply Download.

Apply Download (B)

This selection applies the downloaded code and drops all connections by performing a device reset. This screen is used to overlay the previously downloaded image for the card. If you select yes at the Reset System prompt, the system goes through a system restart and interrupts service on the card. For further information on this feature, see Appendix A, Download Code.

NOTE: If you have not previously downloaded code, then you will not be able to access this selection.

4-4 January 1999 8000-A2-GB26-10