8310 MVL and 8510 RADSL Card Configuration
Table 4-6. Filters Options (2 of 2)
IP Filters (IP Filter Configuration) (continued) | |
|
|
Filter Name ± Up to 12 characters.
Default Filter Action ± Forward (Packet)/Discard (Packet) (Default = Forward). The Default Filter Action applies when there is no match or the filter has no rules configured.
DHCP Filter Action ± Forward (Packet)/Discard (Packet) (Default = Forward). Forwards or discards DHCP transaction traffic on a particular DSL port.
Rule # ± Up to 33 rules can be configured for each filter. The rule number is automatically assigned. The rules are reviewed sequentially. The most common rules should be entered first.
Source Address ± nnn.nnn.nnn.nnn format. Enter valid host or network IP address. If 0.0.0.0 is entered, Source Comparison is ignored.
NOTE: For additional information, refer to Configuring Subnet Addressing in Chapter 3, Configuring the Hotwire DSLAM.
Source Mask ± nnn.nnn.nnn.nnn format. If you specify a source subnet mask of 0.0.0.0, the system skips the source address comparison.
Source Comparison ± Enabled/Disabled (Default = Disabled). When Source Comparison is disabled, the comparison is ignored.
Source Port # ± 0±65535 (Default = 0).
Comparison Type (for source information) ± Ignore ± Do not do a comparison. To do a comparison on the port number specified in the packet and the rule, specify one of the following: Ignore ± Ignore ports, EQ ± Equal to, NEQ ± Not Equal to, GT ± Greater than, LT ± Less than, In_Range ± Within the specified range, Out_Range ± Outside of the specified range (Default = Ignore).
Max. Source Port No. ± 0±65535. Appears only when the source comparison type is In Range or Out of Range.
Destination Address ± nnn.nnn.nnn.nnn format.
Destination Mask ± nnn.nnn.nnn.nnn format. If you specify a destination subnet mask of 0.0.0.0, the system skips the destination address comparison.
Destination Comparison ± Enabled/Disabled (Default = Disabled). When Destination Comparison is disabled, the comparison is ignored.
Destination Port # ± 0±65535 (Default = null).
Comparison Type (for destination information) ± Ignore ± Ignore ports, EQ ± Equal to, NEQ ± Not Equal To, GT ± Greater than, LT ± Less than, In_Range ± Within the specified range, Out_Range ± Outside of the specified range.
Max. Destination Port No. ± 2±65535. Appears only when the destination port comparison type is In Range or Out of Range.
Action ± For a rule, TCP, UDP, or ICMP traffic will be forwarded or discarded provided other conditions have been satisfied.
HTCP ± Forward/Discard (Default = Forward).
HUDP ± Forward/Discard (Default = Forward).
HICMP ± Forward/Discard (Default = Forward).
Delete Rule ± Yes/No (Default = No).
January 1999 |
