Configuring the Hotwire DSLAM
Configuring IP Filter Rules
"Procedure
Configure IP Filters and associated rules in the following sequence:
1.Define each filter. An IP filter consists of a set of rules.
2.Configure rules for each filter. TCP/UDP/ICMP traffic types can be selectively forwarded or discarded based on the conditions specified in the rule.
3.Bind the filter to the interface using the General Interfaces screen
ÐAn inbound filter acts on packets in the upstream direction from the client to the NSP server.
ÐAn outbound filter acts on packets in the downstream direction from the NSP server to the client.
To configure the IP Filter attributes and rules, refer to DSL Configuration Filters
Screen in Chapter 4, 8310 MVL and 8510 RADSL Card Configuration.
January 1999 |