Paradyne 8510 RADSL, 8310 MVLt Network Protocol Options 2, TCP Statistics TCP Data Statistics

Monitoring the Hotwire DSLAM

Table 5-4. Network Protocol Options (2 of 5)

TCP Statistics (TCP Data Statistics) B-D-C

Displays a summary of the Transmission Control Protocol (TCP) data activity (packets and bytes transmitted and received) over the backplane of the MCC card. The TCP statistics is measuring packets that terminate on the DSL card.

The left column displays received data and the right column displays transmitted data. The counters increment in real time and you may press Ctrl-r at any time to reset the counters.

Left column:

Packets Received ± Number of TCP packets received by the card.

acks ± Number of acknowledgements received for transmitted packets. (Also shows the number of bytes that were acknowledged as received by the remote system.)

duplicate acks ± Number of duplicate acknowledgements received.

acks for unsent data ± Number of acknowledgements received for data that has not been sent yet.

pkts/bytes rcvd in-sequence± Number of packets/bytes correctly received in sequence for data that had to be split in multiple TCP packets.

dupl pkts/bytes ± Number of duplicate packets/bytes received.

pkts/bytes w. some dup. data ± Number of packets/bytes with some duplicated data. (Duplicated data is discarded by TCP.)

pkts rcvd out-of-order± Packets received out of order.

pkts of data after window ± Packets of data received after receive window is full. window probes ± Packets received looking for space in the receive window.

window update pkts ± Packets received from the remote system advertising a new window size.

pkts rcv after close ± Packets received after the TCP connection is shut down.

discarded for bad checksum ± Packets that were discarded because the checksum failed.

discarded for bad header offset fields ± Packets discarded because the TCP header was corrupted.

discarded because packet too short ± Packets discarded because the packet was too short (not a complete TCP header).

Right column:

Packets Sent ± Number of TCP packets sent by the card.

data pkts ± Number of the sent packets that were data packets instead of TCP control packets.

data pkts retransmit ± Number of packets that had to be transmitted.

ack-only pkts ± Number of sent packets that contained only an acknowledgement of a received packet and no additional data.

URG only pkts ± Number of packets that contained only an Urgent flag and no data.

window probe pkts ± Number of packets that were window probes.

window update pkts ± Number of packets that were advertising new window size.

control pkts ± Number of SYN, FIN, and RST control packets sent (Sync, Finish, and Reset flags).

5-14 January 1999 8000-A2-GB26-10