Monitoring the Hotwire DSLAM
Table 5-5. Bridge Options (2 of 3)
MAC Table | |
|
|
Displays the MAC table.
Bridge ± lb0 ± Name of the Logical Bridge (Equivalent to e1a Ethernet). Entry # ± Enter the MAC table entry number you wish to view.
Entries ± Number of entries in the MAC table.
Bridge Timer ± Timer that is used to show dynamic MAC addresses.
#± Entry number.
MAC Address ± MAC address in xx.xx.xx.xx.xx.xx format.
VNID ID ± VNID ID associated with the MAC address.
Age (Secs) ± Age in seconds since the address was last used.
Intf ± Interface behind which the network element associated with the MAC address lies.
Flags ± Dynamic = MAC addresses that are determined via DHCP. Perm (DHCP) = MAC addresses are determined by the lease time. Entries in the MAC table will be removed when the lease time expires.
Client | |
|
|
Displays information on specific clients or allowable subnets.
DSL Port # ± Enter the DSL port number 1±4 (Default = 1).
Item to Display ± Entry number.
Total ± Total number of users.
Item ± Enter the input number of the client (Default = 0).
IP Address ± Client IP address in nnn.nnn.nnn.nnn format (Default = 0).
Subnet Mask or Lease Expiration ± Variable based on Static or Dynamic entry. For static entries, Subnet Mask is used with IP address to specify a range of allowable static host IP entries to the Client table. For dynamic entries, Lease Expiration is the date and time when the client's DHCP lease expires.
NHR ± IP address of the default next hop router in nnn.nnn.nnn.nnn format.
VNID ± VNID between 2±4094 (Default = none).
Type ± S = Static or D = Dynamic.
Port Specific Parameters ± Enabled/Disabled. Shows active VNID information.
NOTE: In order to display the following information, VNID has to be activated on the Port screen in the Configuration Bridge screen menu
DNHR: ± Default next hop router name.
IP Scoping: ± Enabled/Disabled.
Mux Mode: ± Enabled/Disabled.
IP Filtering: ± Enabled/Disabled. IP source filtering.
January 1999 |
