Download Code

A

The Download Code menu option on the Hotwire DSLAM gives you the ability to upgrade your software with a new version of code and then apply this code to your system.

New firmware releases are typically applied to the MCC card, DSL cards, and/or endpoints in your system.

When a software upgrade affects both the MCC and the DSL cards, you must download and apply a new version of code into each of the DSL cards before you download and apply a new version of code into the MCC.

When you are downloading code to an endpoint, configure your TFTP server with the following timeout values:

HRetransmission timeout ± Value not less than 10 seconds.

HTotal transmission ± Value not less than three times the retransmission timeout.

You can also use the above values for a standard TFTP transfer.

8000-A2-GB26-10

January 1999

A-1

Page 95
Image 95
Paradyne 8310 MVLt, 8510 RADSL manual Download Code