Paxar 9401 manual Creating Batch Data Files

9401/9402 System Administrator's Guide

Creating Batch Data Files

1.Using an ASCII text editor, create a file to hold your batch information.

2. Place a left brace { on line 1. Go to the next line.

3.Refer to the Batch Header section of the Batch Worksheet.

4.Type all values from boxes B1 through B4 on line 2 in your file as follows.

∙Place the B from box B1 at the very beginning of the line. Do not place a space or any other character before the B.

∙Enter all information in capital letters.

∙Place a comma between all values.

∙Make sure you have 4 items in line 2.

∙ Place a split vertical bar at the end of line 2.

∙Go to the next line after the split vertical bar.

6-14