Defining Boxes, Defining Lines as Vectors

2. Designing a Format

Defining Lines as Vectors

1.Follow the steps to define lines as segments with the exception of boxes L2, L5, and L6.

2.Write V in box L2.

3.In box L5, write the direction the line travels from its origin:

0, 90, 180, or 270 (in degrees).

4.Write the length of the line, in your specified units, in box L6.

1.Define the format header if you have not

already done so.

2.Find "Boxes" on the Format Worksheet. Measure from the bottom of the print area to the lower-left corner of the box.

Write the distance, in the units selected for your format, in box Q2.

3.Measure from the left edge of the print area to the lower-left corner of the box. Write the distance, in your selected units, in box Q3.

2-39