Paxar 9401 manual Reduced Dot Bold

2. Designing a Format

12.You can alter space between characters. This space is measured in dots (1/192 inch). Write the number of dots (0 to 99) in box T7. Enter 0 for default character spacing.

Any number other than 0 or the default number will affect your field width.

Default spacing is
Standard	3 dots
Reduced	1 dot
Bold	3 dots
OCRA-like	3 dots

The character width chart earlier in this chapter reflects default spacing.

13.Write 1, 2, 3, or 4 in box T8 to indicate your font selection. Refer to the table earlier in this chapter for samples.

1Standard font

2Reduced font

3Bold font

4OCRA-like font

14.Write a number from 1 to 7 in box T9 to indicate the number of times to magnify character height. Refer to the table on page 2-16. Enter 1 to use the standard size.

15.Write a number from 1 to 7 in box T10 to indicate the number of times to magnify character width. Refer to the table on page 2-17. Enter 1 to use the standard size.

Designing a Format

2-19