Paxar 9401 manual Unit Supply Size Maximum Print Area Measure

2. Designing a Format

The Print Area

If you use supplies larger than 2 inches x 4 inches, your printer may not print an area that covers the entire supply. Check the table below to determine the maximum print area.

Unit of	Supply Size		Maximum Print Area
Measure	Maximum	Minimum	Model 9401	Model 9402
Metric	63.5mm x	19.05mm x	50.8mm x	50.8mm x
	228.6mm	19.05mm	152.4mm	101.6mm
English	2.5" x 9"	0.75" x 0.75"	2" x 6"	2" x 4"
Dots	480 x 1728	144 x 144	384 x1152	384 x 768

This table is based on standard configurations. Some 9402 printers may have optional memory installed, allowing for the larger print image.

Designing

The print area is in the lower left region of the supply. The bottom is the edge that exits the printer first.

The actual print area begins approximately 0.05 inches from the bottom and 0.075 inches from the left edge of the supply.

If you want to shift printing to a different part of the supply, see "Setting Supply Options" in your Operator's Handbook.

2.5" x 9"

supply

2" x 6"

or

2" x 4"

Print

Area

a Format

NOTE: If you have a format that covers the entire six inches of the print area length, the printed area may vary from 5.9 to 6.1 inches, due to supply and machine tolerances.

2-7