Pelco CM6800E-48X8 Create and RUN a Pattern, Patterns are not available with the KBD100 keyboard

CREATE AND RUN A PATTERN

Patterns are not available with the KBD100 keyboard.

KBD200A/300A KEYBOARDS

Create a Long Pattern

1.Enter a camera number.

2.Enter 0.

3.Press and hold the PATTERN key for two seconds.

4.The monitor will indicate the programming function is active. Move the camera position as desired for the pattern.

5.Press the ACK key to close the programming function.

Create a Short Pattern

1.Enter a camera number.

2.Enter the short pattern number (1 or 2).

3.Press and hold the PATTERN key for two seconds.

4.The monitor will indicate the programming function is active. Move the camera position as desired for the pattern.

5.Press the ACK key to close the programming function.

Run a Long Pattern

1.Press the PATTERN key.

2.Move the joystick or call a preset to stop the pattern.

Run a Short Pattern

1.Enter the short pattern number (1 or 2).

2.Press the PATTERN key.

3.Move the joystick or call a preset to stop the pattern.

KBD960/KBR960 KEYBOARDS

Refer to the KBD960 Keyboard Installation/Operation manual for instructions on creating a pattern.

1.Select PRST to display the Preset Menu.

2.Select to start a pattern.

OR

1.Select PRST to display the Preset Menu.

2.Enter 1.

3.Select to run the first pattern of previously defined half- patterns.

OR

1.Select PRST to display the Preset Menu.

2.Enter 2.

3.Select to run the second pattern of previously defined half-patterns.

70 C1528M-F (6/05)