Pelco CM6800E-48X8 manual Monitor Display, Camera Title, Type Display Values

MONITOR DISPLAY

Use the Monitor screen to adjust monitor display settings for your system. You can adjust settings for the current monitor only (CURRENT) or for all system monitors (ALL).

PELCO SWITCHER		MONITOR CURRENT
	MODEL CM6800E
	MAIN MENU	CAMERA NUMBER:	ON
1	CAMERA	CAMERA TITLE:	ON
2	LOGICAL CAMERA	R/X TYPE:	ON
3	MONITOR	MON/ALM NUMBER:	ON
4	ACCESS	MON/ALM STATUS:	ON
5	TIME & DATE
		TIME:	ON
6	PORT
7	PRIORITY	DATE:	ON
8	SEQUENCE	BRIGHTNESS	8
9	MACRO
10	ALARM CONTACTS	POSITION DISPLAY
11	EVENT TIMER
12	SET AUXILIARY	SET ALL
13	SET PASSWORD
14	SYSTEM	RETURN
15	ABOUT CM6800E

	ENGLISH
	RETURN
	Figure 44. Monitor Screen
MONITOR:	Select CURRENT to program the monitor display for the monitor you are currently operating or ALL for all monitors
	connected to the CM6800E.

If you select ALL, you must navigate left or right in the SET ALL field to apply programming changes (refer to the SET ALL field description).

CAMERA NUMBER:	Enable (ON) or disable (OFF) on-screen display of the logical camera
	number.
CAMERA TITLE:	Enable (ON) or disable (OFF) on-screen display of the camera title
	(maximum of 20 alphanumeric characters).
R/X TYPE:	Enable (ON) or disable (OFF) on-screen display of the camera control
	type. The letter displayed on the monitor reflects the receiver control
	type selected in the CONTROL field on the Camera screen.
	R/X TYPE DISPLAY VALUES:
	E = Coaxitron extended mode (32-bit)
	S = Coaxitron standard mode (15-bit)
	M = Genex multiplexer
	P = PTZ-P (RS-422 through Control Port PTZ-A or PTZ-B)
	D = PTZ-D (RS-422 through Control Port PTZ-A or PTZ-B)

0001 E CAM 1

0001 01-JAN-01 01:01:01

0001 E CAM 1

0001 01-JAN-01 01:01:01

0001 E CAM 1

0001 01-JAN-01 01:01:01

NOTE: A 96 x 16 system includes Control Ports PTZ-C and PTZ-D.

56 C1528M-F (6/05)