Pelco CM6800E-48X8 manual Operate AUXILIARIES/RELAYS, Operate a Local Auxiliary

OPERATE AUXILIARIES/RELAYS

Local auxiliaries are the outputs on the rear panel of the CM6800E. External auxiliaries are available by connecting an REL2064 Relay Interface Unit to the CM6800E through COM port 3.

Operate a Local Auxiliary

KBD100/200A/300A KEYBOARDS	KBD960/KBR960 KEYBOARDS
Auxiliary 1 relay: Press F1 to activate/deactivate.	Auxiliary 1 relay: Press F12* to activate/deactivate.
Auxiliary 2 TTL output: Press F2 to activate/deactivate.	Auxiliary 2 TTL output: Press F24* to activate/deactivate.
	* F12 and F24 are the default auxiliary control function keys; user-
	selected function keys can be defined through the Key Define
	Menu. Refer to the KBD960 Keyboard Installation/Operation
	Manual for instructions.
	NOTE: If you connect REL2064 Relay Interface Units (up to four) to
	the CM6800E, operation of the two relays on the rear panel of the
	CM6800E will also operate the first two relays on the first external
	unit (unless you number the external relays starting at 64).

Operate an External Auxiliary

The CM6800E can control up to four REL2064 Relay Interface Units connected to the system. Each unit provides 64 relays. Refer to the REL2064 Relay Interface Unit Installation/Operation Manual for detailed information. External relays cannot be operated with the KBD100.

KBD200A/300A KEYBOARDS	KBD960/KBR960 KEYBOARDS
The KBD200A/300A keyboards (firmware version 4.2 and	1.	Enter the GPI number for the appropriate relay output.
later) can operate external relays.	2.	Press	GPI .
Refer to the KBD200A Keyboard Installation/Operation	3. Press the desired AUX number icon to activate the relay and
Manual or the KBD300A Keyboard Installation/Operation
		associated peripheral device.
Manual for instructions.
NOTE: External relays cannot be operated with KBD200A/		(Press	to access AUX 5-8.)
	4.	If MTRY is highlighted, the operation is momentary. If MTRY is
300A keyboard firmware versions prior to 4.2.
		not highlighted, the operation is latching. Refer to the
		KBD960 Keyboard Installation/Operation Manual for
		instructions.

Operate an Auxiliary in a Receiver

Auxiliary control is not available with the KBD100.

KBD200A/300A KEYBOARDS	KBD960/KBR960 KEYBOARDS
Press AUX ON/F4 to activate.	From the Camera Menu, press 1 , and then release to control an
Press AUX OFF/F5 to deactivate.	AUX 1 momentary function on the selected camera.
	Press		to control an AUX 2 momentary function. Press	to
OR		2
	access	3	through 8 .

To control a momentary function:

1.Enter the auxiliary number.

2.Press and hold AUX ON/F4, and then release.

C1528M-F (6/05) 71