CONTROL RECEIVERS

Select a suitable camera and operate a PTZ function. A keyboard with “view-only” access can view the signal from the specified camera but cannot control the camera.

Extended Coaxitron protocol receivers can be operated without any programming changes. Other receiver control protocols require programming changes. Refer to the Programming section.

Receiver control is not available with the KBD100 keyboard.

KBD200A KEYBOARD

Pan/Tilt/Zoom

Lens Control: Focus, Iris

 

 

Press and hold the appropriate pan/tilt key until the camera

Press and hold the appropriate lens control key until the desired

reaches the desired position. To change the speed of movement,

effect is seen.

press a number (1-9) key first (1=slowest, 9=fastest). Press and

 

hold the appropriate zoom key until the desired effect is seen.

 

 

 

KBD300A KEYBOARD

 

 

 

Pan/Tilt/Zoom

Lens Control: Focus, Iris

 

 

Move the joystick until the camera reaches the desired position.

Press and hold the appropriate lens control key until the desired

To increase the speed of movement, move the joystick farther

effect is seen.

from center.

 

Twist the joystick clockwise to zoom in, counterclockwise to zoom

 

out.

 

 

 

KBD960/KBR960 KEYBOARDS

 

 

 

Pan/Tilt/Zoom

Lens Control: Focus, Iris

Move the joystick until the camera reaches the desired position.

Use the NEAR/FAR key to focus near or far.

To increase the speed of movement, move the joystick farther

Use the OPEN/CLS key to open or close the iris.

from center or press the T key to pan at turbo speed.

 

Twist the joystick clockwise to zoom in, counterclockwise to zoom

 

out. Or use the IN/OUT key to zoom in or out.

 

 

 

66

C1528M-F (6/05)

Page 66
Image 66
Pelco CM6800E-48X8 manual Control Receivers