Please note the color order

 

The colors of the jacks on the DVD Recorder must match those on the

 

TV (red-red/blue-blue/green-green). If they are not matched properly,

 

this could cause the color of the picture to be reversed or there could

Tip

be no picture at all.

5Use an audio cable and plug one end into the OUT AUDIO LR jack at the back of the DVD Recorder (next to OUT COMPONENT VIDEO ) and the other into the red/white Audio

In jacks of the TV (usually called Audio in', 'AV in'. Please see your TV's instruction manual).

6Switch on the TV.

If necessary, set the TV to the Component Video channel. See the operating instructions of your TV for details.

7Demo Pin

Your DVD-Recorder is equipped with a Retail Demo Pin inserted in the G-LINKjack at the back. On the retail floor with the Demo Pin inserted, the demo about the GUIDE Plus+® system is automatically activated after the automatic channel search. Remove the Demo Pin to disable the Retail Demo feature.

8Connect the mains jack 4MAINS at the back of the DVD Recorder with the power supply using the supplied power cable.

The most important features of the DVD Recorder will appear on the display.

After the initial installation is completed, this function will be switched off. How you switch on this function again, read in the chapter 'User preferences' in the section 'Standby'.

9

Press STANDBY-ONm on the recorder. '￿￿ ￿￿ ￿￿￿' will

appear on the display.

ENGLISH

Connecting the DVD Recorder

13

 

Page 25
Image 25
Philips DVDR 80 manual Demo Pin, Please note the color order