8When the channel search is completed, 'Auto ch. search complete' will appear on the TV screen.

9Press SYSTEM-MENUrepeatedly to remove all the menus from the screen.

aVery few TV channels were found

b During 'Automatic channel search' the DVD Recorder detects whether an antenna or a cable TV signal is connected. If you have connected a cable TV signal but found very few TV channels, you must search the channels manually.

1To do so, select 'Cable/Antenna' instead of line 'Auto Ch. Programming' in step 6 and confirm with C .

2If you select 'Cable', channels 1-125 will be available. If you select 'Anten.', channels 2-69 will be available. Select your type of connection by pressing C repeatedly:

'Anten.', 'Cable' or 'Auto.' automatically detects which one you have.

3

Confirm the setting with OK .

 

 

4

Press SYSTEM-MENUto go to the next menu. Press

OK to

 

 

start channel search as prompted by the on-screen message. When

 

 

the channel search is complete, press SYSTEM-MENUrepeatedly

Problem

 

to remove all the menus.

 

You can read about how to search for a TV channel manually in the following section 'Adding and deleting TV channels manually'.

Installation

Auto Ch. Programming

Searching for TV channels

000 Channels found

Please wait

26

Installing your DVD Recorder

 

Page 37 Page 39
Page 38
Image 38
Philips DVDR 80 manual AVery few TV channels were found, OK to
Page 37 Page 39
Top Page Image Contents