Programming a recording with the 'VCR Plus+® system'

Thanks to this programming system, you no longer need to tediously enter the date, TV channel, start and end times. All the information needed for programming is contained in the PlusCode programming number. This 8-digit PlusCode number is found in most TV listings magazines.

ATTENTION!

Without GUIDE Plus+® system data it is not possible to program a recording with the VCR Plus+® system

1Switch on the TV. Select the channel number for the DVD Recorder (channel 3 or 4 or the Audio/Video In channel).

2With the Recorder on, press TIMER s on the remote control. The information will be displayed.

aI will see some informations about the GUIDE Plus+® system

b The GUIDE

Plus+® system was not installed yet. Read therefore in

 

the chapter

'The GUIDE Plus+® system' the section 'Set up the

Problem

GUIDE Plus+® system'.

3Select line 'PlusCode' using CH- B .

4Enter the entire PlusCode number. This number is up to 8 digits long and can be found next to the start time of the TV program

in your TV listings magazine. e.g.: 5-234-89 or 5 234 89

Enter 523489 for the PlusCode number.

If you make a mistake, press ACH+ . Select line 'PlusCode' using CH- B .

5

Confirm with OK .

ENGLISH

Programming a recording (TIMER)

81

 

Page 93
Image 93
Philips DVDR 80 manual Programming a recording with the VCR Plus+ system, Select line PlusCode using CH- B