Philips DVDR 80 manual LProgramming a recording Timer

LProgramming a recording (TIMER)

General

Use programmed recording (TIMER) to automatically start and stop a recording at a later date. The DVD Recorder will switch to the right channel and begin recording at the correct time. With this DVD Recorder, you can pre-program up to 15 recordings within a period of one year.

To make a programmed recording, your DVD Recorder needs to know:

*the date of the recording

*the channel number of the TV channel

*the start and stop time of the recording

*the recording mode ('M1/M2/M2x/M3/M4/M6/M8')

This information is saved in a TIMER block.

Before you begin, make sure the clock is set. If the clock is not set, the 'Time/Date' menu will appear when you press the TIMER s button.

Programming a recording with the 'GUIDE Plus+® system'

The GUIDE Plus+® system has made it even easier to program recordings. All you have to do is select the show you want to record from a channel listing and do the programming at the touch of a button.

1Switch on the TV. If required, select the channel number for the DVD Recorder (channel 3 or 4 or the Audio/Video In channel).

2Press GUIDE/TV on the remote control.

3	Use ACH+ or CH- B to select the TV station, and D or
	C to select the show to record.

4Press the green function button (labeled 'RECORD' on the screen).

WARNING! Do not press REC/OTR n !

The TV show will be stored in memory for recordings. Read the information on the screen.

ENGLISH

Programming a recording (TIMER) 79